raspberrypi:start
This is an old revision of the document!
Naudinga informacija apie Raspberry Pi
Scratch GPIO
GPIO
Kad matytu raspberrypi is windows reikia toki koda paleisti
sudo apt-get install samba sudo apt-get install winbind sudo apt-get install samba samba-common-bin sudo nano /etc/samba/smb.conf
tada darasyti toki
[pihome] comment= Pi Home path=/home/pi browseable=Yes writeable=Yes only guest=no create mask=0777 directory mask=0777 public=no
ir tada vel paleisti
smbpasswd -a pi
HDMI rezoliucijos nustatymas ir dydžiai
raspberrypi/start.1485471779.txt.gz · Last modified: by aistis