esp8266
MAY NEED ADDITIONAL 3.3V POWER
arba galima ideti 2000mf kondika tada viskas susireguliuoja ir veikia nuo usb serial adapterio
valgo 72ma
naudoti prisijungbimui sita terminala: https://www.compuphase.com/software_termite.htm
yra labai geras programatorius su kondensatoriu ir jam pakanka usb dudoamu 3.3. voltu
IF ALL WORKS OK
COMMAND LIB IS HERE:
https://room-15.github.io/blog/2015/03/26/esp8266-at-command-reference/#AT
https://www.espressif.com/sites/default/files/documentation/4a-esp8266_at_instruction_set_en.pdf
pakeisti ssd ir palikti atvira:
AT+CWSAP=“Hidden treasure 13”,“”,13,0
programavimas su arduino ide reikia spaudyti tuos flash ir reset butonus
https://create.arduino.cc/projecthub/ROBINTHOMAS/esp8266-esp-01-webserver-7248ca
BLINK melyna wifi lempute
// the setup function runs once when you press reset or power the board void setup() { // initialize digital pin 13 as an output. pinMode(1, OUTPUT); } // the loop function runs over and over again forever void loop() { digitalWrite(1, HIGH); // turn the LED on (HIGH is the voltage level) delay(100); // wait for a second digitalWrite(1, LOW); // turn the LED off by making the voltage LOW delay(100); // wait for a second }
deep-sleep kad miegotu, reikia sujungti 2 kontaktus ir nuzudyti power led'a
https://hackaday.com/2015/02/08/hack-allows-esp-01-to-go-to-deep-sleep/