The ESP32-C6 Super Mini is an ultra-compact development board based on the ESP32-C6 SoC, designed for modern low-power IoT applications where size matters.

• 32-bit RISC-V CPU (up to ~160 MHz)
• Wi-Fi 6 (2.4 GHz) support
• Bluetooth Low Energy 5.x
• Ultra-low-power operation
• On-board PCB antenna
• USB-C (or Micro-USB on some variants) for power and programming
• Integrated flash memory (commonly ~4 MB)
• Reset and Boot buttons

• GPIO (limited number due to small size)
• UART
• SPI
• I²C
• PWM
• ADC

• 3.3 V logic level
• Designed for battery-powered and energy-efficient projects

• ESP-IDF
• Arduino framework

• Smart home and Matter-enabled devices
• Sensors and IoT nodes
• Wearables and compact embedded systems
• Prototyping in space-constrained designs

Due to its very small form factor, the Super Mini board may not be breadboard-friendly and has fewer exposed GPIO pins compared to standard ESP32 development boards.

void setup() {
  // put your setup code here, to run once:
 
  Serial.begin(115200);
  while (!Serial);
 
  Serial.println("Hello World");
  Serial.println("ESP32-C6 Development Kit");
  Serial.println("--------------------------------");
}
 
void loop() {
  //blink led
  pinMode(15, OUTPUT);
  digitalWrite(15, HIGH);
  delay(1000);
  digitalWrite(15, LOW);
  delay(1000);
}