esp8266

MAY NEED ADDITIONAL 3.3V POWER

arba galima ideti 2000mf kondika tada viskas susireguliuoja ir veikia nuo usb serial adapterio

valgo 72ma

naudoti prisijungbimui sita terminala: https://www.compuphase.com/software_termite.htm

yra labai geras programatorius su kondensatoriu ir jam pakanka usb dudoamu 3.3. voltu

IF ALL WORKS OK

COMMAND LIB IS HERE:

https://room-15.github.io/blog/2015/03/26/esp8266-at-command-reference/#AT

https://www.espressif.com/sites/default/files/documentation/4a-esp8266_at_instruction_set_en.pdf

pakeisti ssd ir palikti atvira:

AT+CWSAP=“Hidden treasure 13”,“”,13,0

---

programavimas su arduino ide reikia spaudyti tuos flash ir reset butonus

https://create.arduino.cc/projecthub/ROBINTHOMAS/esp8266-esp-01-webserver-7248ca

BLINK melyna wifi lempute

// the setup function runs once when you press reset or power the board
void setup() {
  // initialize digital pin 13 as an output.
  pinMode(1, OUTPUT);
}
 
// the loop function runs over and over again forever
void loop() {
  digitalWrite(1, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(100);              // wait for a second
  digitalWrite(1, LOW);    // turn the LED off by making the voltage LOW
  delay(100);              // wait for a second
}

deep-sleep kad miegotu, reikia sujungti 2 kontaktus ir nuzudyti power led'a

https://hackaday.com/2015/02/08/hack-allows-esp-01-to-go-to-deep-sleep/