wiki.raudys.com

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

copy data from input pin to output pin - example ws8212 data stream

fast way to copy read/write register values

<code cpp>
void loop() {
  int v1 = 0;
  portDISABLE_INTERRUPTS();
  for(;;) {
    auto v1 = (GPIO_REG_READ(GPIO_IN_REG) & BIT(25));
    if (v1) {
       GPIO_REG_WRITE(GPIO_OUT_W1TS_REG, BIT(27)); 
       //cnt3 = 0;
    }
    else { 
      GPIO_REG_WRITE(GPIO_OUT_W1TC_REG, BIT(27)); 
      //cnt3 ++;
    }
    cnt3 ++;
    if (cnt3 % 1000000 == 0) {
      //Serial.println("loop");
      portENABLE_INTERRUPTS();
      vTaskDelay(10);
      portDISABLE_INTERRUPTS();
    }    
  }
}
</code>


speed is like 3.5 times faster

  * 07:31:40.620 -> register based read : 53
  * 07:31:40.620 -> digitalRead based read : 172

<code>
  auto t1 = micros();
  int v1;
  for (int i=0;i<1000;i++)
    v1 = (GPIO_REG_READ(GPIO_IN_REG) & BIT(25));
  auto t2 = micros();
  auto t3 = micros();
  for (int i=0;i<1000;i++)
    v1 = digitalRead(25);
  auto t4 = micros();
  Serial.printf("register based read : %d\n",t2-t1);
  Serial.printf("digitalRead based read : %d\n",t4-t3);  
</code>