wiki.raudys.com

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
esp8266

{{:arduino:pasted:20170717-173804.png}}

MAY NEED ADDITIONAL 3.3V POWER


arba galima ideti 2000mf kondika tada viskas susireguliuoja ir veikia nuo usb serial adapterio

valgo 72ma

naudoti prisijungbimui sita terminala: https://www.compuphase.com/software_termite.htm
{{:arduino:pasted:20170719-155837.png}}


{{:arduino:pasted:20170717-173739.png}}

yra labai geras programatorius su kondensatoriu ir jam pakanka usb dudoamu 3.3. voltu
{{:arduino:pasted:20170719-155750.png}}

IF ALL WORKS OK

{{:arduino:pasted:20170717-232251.png}}

COMMAND LIB IS HERE:

https://room-15.github.io/blog/2015/03/26/esp8266-at-command-reference/#AT

https://www.espressif.com/sites/default/files/documentation/4a-esp8266_at_instruction_set_en.pdf


pakeisti ssd ir palikti atvira:

AT+CWSAP="Hidden treasure 13","",13,0


----

programavimas su arduino ide
reikia spaudyti tuos flash ir reset butonus

https://create.arduino.cc/projecthub/ROBINTHOMAS/esp8266-esp-01-webserver-7248ca

BLINK melyna wifi lempute
<code c++>
// the setup function runs once when you press reset or power the board
void setup() {
  // initialize digital pin 13 as an output.
  pinMode(1, OUTPUT);
}

// the loop function runs over and over again forever
void loop() {
  digitalWrite(1, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(100);              // wait for a second
  digitalWrite(1, LOW);    // turn the LED off by making the voltage LOW
  delay(100);              // wait for a second
}
</code>


deep-sleep kad miegotu, reikia sujungti 2 kontaktus ir nuzudyti power led'a

https://hackaday.com/2015/02/08/hack-allows-esp-01-to-go-to-deep-sleep/