Differences

This shows you the differences between two versions of the page.

--- esp32:deep_sleep [2019/05/27 10:48] – aistis
+++ esp32:deep_sleep [2021/02/20 15:22] (current) – aistis
@@ Line 1: / Line 1: @@
-deep sleep esp32
+esp32 deep sleep
-<code cpp>
+<code c++>
   esp_sleep_enable_timer_wakeup(5 * 1000000 );  //5 seconds
   Serial.println("Setup ESP32 to sleep for every " + String(5) +  " Seconds");
@@ Line 9: / Line 9: @@
 </code>
+esp32 light sleep
+<code c++>
+esp_sleep_enable_timer_wakeup(1000 * 1000 );
+esp_light_sleep_start(); //1000 milliseconds sleep
+</code>
+  * lolin32 su batarkiu palaikymu light sleep valgo 1.4 ma
+  * lolin32 su batarkiu palaikymu deep sleep valgo 0.17 ma ar 0.14 (pagal kita multimetra)
+power consumption GPIO
+  rtc_gpio_hold_dis(GPIO_NUM_13);
+  rtc_gpio_hold_dis(GPIO_NUM_15);
+  digitalWrite(15, LOW);
+  rtc_gpio_isolate(GPIO_NUM_13); //disconect pins to prevent power loss
+  rtc_gpio_isolate(GPIO_NUM_15);
+below sometimes works better
+https://esp32.com/viewtopic.php?t=3083
+<code>
+    esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_SLOW_MEM, ESP_PD_OPTION_OFF);
+    esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_FAST_MEM, ESP_PD_OPTION_OFF);
+    esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_OFF);
+    esp_sleep_enable_timer_wakeup(1000000);
+    esp_deep_sleep_start();
+</code>